Atec Robotics

Menu principale:

Servo Drives

Prodotti > Servo Drives

ESTUN SERVOS BASIC SELECTION
About Estun

L:\WEB-PAGES\WEB-ATEC-DA-MAY-2010\ESTUN\family.jpg
Error File Open Error

ESTUN drives sizes and groups are available in order to support any possible system configuration. The selection of ESTUN Servos can start in principle on the base of the communication prococol as shown in the following table. Some Test Benches are available at ATEC Robotics laboratories for system verification. Contact ATEC-ESTUN Technical Support for detailed information, system definition and direct tests on ESTUN products.

In case of frequent start/stop motions (i.e.packing or textile), motors and drives are provided with special treatments to let them suitable.

L:\WEB-PAGES\WEB-ATEC-DA-MAY-2010\ESTUN\Selection Guidance.jpg
Error File Open Error

As shown in the picture below EDC, EDB and ProNet series are classified in power also.

A more detailed selection can be performed through the following table ( download original document)

For Drive and motor coding please download: EDB & EDC series product brochure and ProNet series product brochure

About Drives

Drives are divided in three classes. Please contact ATEC Robotics 24h Technical Support for the best configuration. Test servos are available in a few days to test your configuration.

.... EtherCat protocol forthcoming!

EDC series, single phase up to 0.75kW - Very small and capable

L:\WEB-PAGES\WEB-ATEC-DA-MAY-2010\ESTUN\photo\EDC.JPG
Error File Open Error

Click to download EDC series manual

EDB series, single and three phases, up to 5kW

L:\WEB-PAGES\WEB-ATEC-DA-MAY-2010\ESTUN\photo\EDB r.jpg
Error File Open Error

Click to download EDB series manual

ProNet, up to 15kW for high level applications and power

Click to download ProNet series manual

L:\WEB-PAGES\WEB-ATEC-DA-MAY-2010\ESTUN\photo\Pronet2.jpg
Error File Open Error

About Motors

Motors sizes are divided in the following classes based on torque and speed. Please contact ATEC Robotics Technical Support for the best configuration. Test servos are available in a few days, if not in house, to test your configuration.

For motor selection download: EDB & EDC series product brochure and ProNet series product brochure

EMJ, small size up to 1kW (3.18Nm)

L:\WEB-PAGES\WEB-ATEC-DA-MAY-2010\ESTUN\EMJ motors.jpg
Error File Open Error

click to view motor type

For motor selection download: EDB & EDC series product brochure and ProNet series product brochure

EMG, medium size up to 5kW (23.9Nm)

L:\WEB-PAGES\WEB-ATEC-DA-MAY-2010\ESTUN\EMG motors.jpg
Error File Open Error

click to view motor type

For motor selection download: EDB & EDC series product brochure and ProNet series product brochure

EML, medium size up to 4kW (38.2Nm)

L:\WEB-PAGES\WEB-ATEC-DA-MAY-2010\ESTUN\EML motors.jpg
Error File Open Error

click to view motor type

For motor selection download: EDB & EDC series product brochure and ProNet series product brochure

EMB, medium size up to 15kW (95.5Nm)

L:\WEB-PAGES\WEB-ATEC-DA-MAY-2010\ESTUN\EMB motors.jpg
Error File Open Error

click to view motor type

For motor selection download: EDB & EDC series product brochure and ProNet series product brochure

Menu di sezione:

Servo Drives ←
ATEC Cooled H.T. Motors