This application lets you control a Teracom TCW121(B) or TCW122(B) Ethernet controller for IP monitoring and management. It can interrogate the device and lets you control the relays or temperature/humidity settings.

Requirements: a TCW121, TCW121B, TCW122, TCW122B by Teracom controller (see www.teracom.cc).

Installation notes: in order to use this app you must **enable SNMP** in your device configuration (in web console, under page "SNMP Setup".

Volete essere informati delle chiamate perse a casa e fuori di casa? Il nuovo widget FRITZ!App Ticker per il FRITZ!Box lo rende possibile.

Il widget FRITZ!App Ticker funziona così:

Collocate semplicemente FRITZ!App Ticker sulla schermata d'avvio del vostro smartphone Android o del tablet Android. Per farlo, dopo l'installazione premete su una parte libera e sufficientemente grande della schermata di avvio e selezionate FRITZ!App Ticker fra i widget. D'ora in poi, FRITZ!App Ticker vi mostrerà le chiamate perse al FRITZ!Box sulla schermata d'avvio.

Le chiamate della giornata risaltano in grassetto. Gli appositi contatori vi mostrano il numero di chiamate ricevute e di quelle a cui ha risposto la segreteria telefonica. Si può richiamare direttamente a partire dall'elenco chiamate o dalla rubrica. Tramite il pulsante "Box" accedete nel browser alla manutenzione remota della vostra interfaccia utente del FRITZ!Box.

In Android 3.x/4.x si può far scorrere l'elenco chiamate direttamente nel widget e, a partire da Android 3.1, l'altezza del widget è modificabile.

L'elenco chiamate viene aggiornato automaticamente in background. Per risparmiare la batteria del vostro apparecchio Android non ha luogo nessun aggiornamento quando si trova in stand-by. Non appena attivate lo smartphone, l'elenco chiamate viene aggiornato automaticamente.

Requisiti minimi:
- modello FRITZ!Box con versione firmware xx.05.04 o più recente (7390, 7360, 7330, 7270, 7240; pianificato: fra l'altro 7320, 6360)
- smartphone/tablet Android con Google Android 2.1 o più recente
- indirizzo Dynamic DNS (ad es. attraverso www.no-ip.com)
- manutenzione remota e indirizzo Dynamic DNS configurati nel FRITZ!Box (richiede la modalità avanzata)

Mit FRITZ!App Cam wird Ihr Smartphone oder Tablet zu Hause zur Webcam. FRITZ!App Cam steuert die Kamera des Smartphones/Tablets und bietet die aufgenommenen Bilder über http oder https zum Betrachten im Browser an, auch von unterwegs über das Internet. Plug-Ins oder eine gesonderte Software sind dafür nicht notwendig. Die Anbindung an die FRITZ!Box geschieht per WLAN. Innerhalb des Heimnetzes bietet FRITZ!App Cam eine IP-Adresse sowie den Port an. Beides kann einfach in die Adresszeile des Browsers übernommen werden. Für den Zugriff über das Internet richtet FRITZ!App Cam auf Wunsch automatisch eine MyFRITZ!-Freigabe ein, so dass der Zugriff einfach über das Portal https://www.myfritz.net oder direkt über die entsprechende MyFRITZ!-Adresse erfolgen kann (hierfür muss die FRITZ!Box bei MyFRITZ! registriert sein). Der Zugriff auf das Kamera-Bild kann auf Wunsch per Kennwort geschützt werden. Es können mehrere Betrachter parallel auf die Bilder von FRITZ!App Cam zugreifen.

Mindestvoraussetzung:
• Smartphone oder Tablet mit min. einer Kamera, ab Android Version 2.2
• FRITZ!Box mit FRITZ!OS ab Version 5.50 (eine MyFRITZ!-Freigabe kann manuell erstellt werden)
• Für die Erstellung einer automatischen MyFRITZ!-Freigabe muss FRITZ!Box mit FRITZ!OS ab Version 6.0 verwendet werden

Erläuterungen zu den erforderlichen Berechtigungen dieser App:
• Zugriff auf die Kamera: selbsterklärend
• Auf externen Speicher (SD-Karte) schreiben: Hier können Schnappschüsse abgelegt werden
• Internet-Zugang: Wird für den Web-Server benötigt
• WLAN-Verbindungen abrufen: Prüfen ob WLAN ein-/ausgeschaltet ist
• Zugriff auf Wake Lock: Um zu verhindern, dass die CPU in den Sleep Mode geht während die App läuft

Mit der 1&1 MobileHome-App haben Sie von überall sicher und komfortabel Zugriff auf Ihren 1&1 HomeServer. So können Sie eine Liste der letzten Anrufe einsehen, eingegangene Sprachnachrichten des Anrufbeantworters abhören und auf Ihr 1&1 SmartHome zugreifen und z.B. die intelligenten 1&1 SmartEnergie-Steckdosen von unterwegs schalten: So ist es ab sofort ein Leichtes, die Kaffeemaschine beim Frühsport schon mal einzuschalten, das Licht auch im Urlaub an- und auszuknipsen, oder zu prüfen, ob das Bügeleisen wirklich aus ist!

Mindestvoraussetzungen:
- 1&1 HomeServer-Modelle mit FRITZ!OS 5.50 oder neuer (FRITZ!Box 7390, 7360(SL), 7330(SL), 7320, 7270 und 7240)

Mit Contacts2FritzBox könnt ihr eure Android-Kontakte als XML File exportieren. Das XML File kann dann in die AVM FritzBox als Telefonbuch importiert werden.
Da die FritzBox allerdings nur 3 Telefonnummern kann, ich jedoch mit der Software alle Telefonnummern exportiere, werden die Telefonnummern im Bearbeitungsmenu der FritzBox falsch angezeigt. Ihr könnt deshalb die Kontakte in eurer FritzBox nicht mehr ändern ohne die Daten dort falsch zu schreiben. Also ändert einfach in eurem Androiden und export neu. Dies funktioniert!

Achtung: Da die Fritzboxen zwischenzeitlich direkt die Google-Kontakte einlesen können, wird diese App nicht mehr weiterentwickelt!

Kontakte aus Ihrem Smartphone über Ihr heimischen Telefon (DECT/ISDN/Analog) anrufen.

Kombinieren Sie die bequeme Bedienoberfläche Ihres Smartphones mit der beste Sprachqualität Ihres heimischen Telefon! Mit Hilfe dieser App wählen Sie aus der Kontaktliste des Smartphones/Tablets eine Telefonnummer aus und das FritzBox baut eine Telefonverbindung zwischen Ihren normalen Telefon und der gewünschte Zielnummer auf.

Auf Ihrem Smartphone entstehen keine Kosten, weil das Smartphone selber keine Telefonverbindung aufbaut. Es steuert lediglich Ihr FritzBox über WLAN.

Voraussetzung: Smartphone eingebucht im WLAN und FritzBox mit eingeschaltete Wählhilfe-Funktion. Sie können die Wählhilfe-Funktion in das Telefonie>>Anrufe>>Wählhilfe Menü der WEB-Oberfläche Ihres FritzBoxes einschalten.

Geprüft mit:
FRITZ!Box Fon WLAN 7170 Firmware-Version 29.04.87
FRITZ!Box Fon WLAN 7170 Firmware-Version 29.04.57
FRITZ!Box Fon WLAN 7390 Firmware-Version FRITZ!OS 05.22
FRITZ!Box Fon WLAN 7390 Firmware-Version FRITZ!OS 05.50
Samsung Galaxy Nexus (Android 4.1)

This is the new Sensor Guardian !!!

EcoGuardian can upload all sensor data from phone to a Pachube / Xively data feed(datafeed id must de the sensor number), show available sensors, and read them out in app

Mit dem Anrufmonitor Premium für FritzBox werden Anrufe die an einer AVM FritzBox eingehen auf dem Android Smartphone oder Tablet angezeigt. Zudem werden Namen, Adresse und Foto dargestellt wenn sie im Google Adressbuch vorhanden sind.

Features:

- Anzeige von eingehenden und abgehenden Telefonaten der FritzBox
- Umgehende Darstellung eines Anrufs in der Benachrichtigungsleiste sobald der Anruf an der Fritzbox eingeht
- Anzeige eines Dialogs
- Keine Anmeldung an der FritzBox notwendig
- Anrufliste
- Kontakte können über Klick auf das Foto geöffnet werden
- Neue Rufnummern können durch Klick auf das Foto ins Adressbuch übernommen werden
- Anzeige der Gesprächsdauer
- Klingelton bei eingehenden Gesprächen
- Statusanzeige über unterschiedliche Icons

Hinweis: Die Anwendung funktioniert nur im lokalen Netzwerk über WLAN der Fritzbox. Eine Anrufanzeige unterwegs wird derzeit nicht untersützt. In der Anrufliste werden nur Anrufe dargestellt während das Android Gerät im lokalen Netz war, es entspricht nicht der FritzBox Telefonhistorie.

A Xively client to view Internet of Things Xively data feeds(http://www.xively.com). Configure connection settings using API KEY and FEED ID from your Xively devices. Set up channel and unit description for identifications. Settings can be saved to lists for repeated access

NCP Secure VPN Client for Android

APPLICATION DESCRIPTION:
NCP Secure VPN Client for Android is a universal IPsec VPN client which is compatible to all major IPsec VPN gateways (e.g. NCP, CISCO, Juniper NetScreen/ScreenOS, Microsoft Server 2008 R2, Check Point, SonicWall, LANCOM Systems, Teldat, Astaro, Adtran).
It provides reliable and encrypted network VPN connectivity from Android based devices, and ensures continuous corporate VPN access for users on the go, without the need to root the device. Whether providing VPN access to a virtual desktop session, business email, or most other Android applications, NCP Secure VPN Client enables business-critical application connectivity.

Please uninstall NCP’s Secure Client Preview (if available) prior to installing the new version. Before you uninstall the client preview, export your existing configuration and import it into the new client.

FEATURES:
- Widget for comfortable start of configured VPN connections
- IKEv1 (Main Mode, Aggressive Mode)
- IP address assignment via local IP address/manually or IKE config. mode
- XAUTH on/off
- Split/full tunneling network access
- Pre-shared key
- Auto reconnect mode: After starting the VPN connection the client will always try to reconnect after interruption of a WiFi or cellular connection, until the connection is manually disconnected by the user
- Profile import of .pcf, .wgx, .ini or .spd files
- One-time-password support (OTP support)

The following features are only available in the Premium version:
- PKCS#12 certificate support
- Configurable connection mode (always, auto-reconnect)
- NCP VPN Path Finder Technology (prerequisite: NCP VPN gateway, starting with v 8.0, at the corporate headquarters)
- IKEv2 support

Furthermore, it is not recommended to have both client versions, NCP Secure VPN Client Premium for Android and NCP Secure VPN Client for Android (or the trial versions), installed in parallel.

FAQ:
For Frequently Asked Questions please visit our Developer Webpage Link.

COMPATIBLE DEVICES:
This release supports Android 4.0 (and later) devices with the VPN API. It is NOT necessary to root the Android device.

COMPANY PROFILE:
NCP Engineering GmbH is a manufacturer of software solutions for high-security company communication over public networks and the Internet. NCP’s core competencies lie in the areas of remote access, IP routing, VPN and firewall technologies, identity and access management (IAM), network access control (NAC) as well as strong authentication and integration of PKI infrastructures.
Simple operation, central management, compatibility and efficiency are essential qualities of the NCP solution. Integration into existing IT infrastructures that use a variety of client platforms can be undertaken without problems. Globally operational organizations rely extensively on NCP products, using them to interconnect all their information exchanges via the Internet.

FEEDBACK:
While we are unable to guarantee compatibility for all devices, we look forward to your feedback in connection with any problems you may encounter. You can provide us with feedback by sending us an email to:
android-vpn@ncp-e.com

By using this application, you agree with the end user license agreement:
http://www.ncp-e.com/fileadmin/pdf/alg_informationen/NCP_License_Terms_Android_Client.pdf

Please READ following completely!

* This Widget connect to a Cisco VPN Server (PIX/ASA/...) or a Fritzbox by a single click on rooted Android 2.x devices.

Attention: if your device has Android 4+ you should use VpnCilla instead because this App needs root access which is an additional security risk! (VpnCilla does not need root access and has much more features).

* VPN Widget won't work unless...
- You have a rooted (jailbreaked, unlocked) phone
- TUN device available in kernel (CONFIG_TUN=y)
- App installed on the phones internal memory (not on SD - Widgets require this)
- Placed it on homescreen as widget (not as app)
- 'Superuser' rights granted on request

* Forget it, if all this sounds scary - VPNC Widget just won't work!!

* Installation and trouble shooting:
- Install VPNC Widget on homescreen as Widget - not as App!
- Doubleclick widget to change preferences and checking prerequisites of phone (if doubleclick doesn't work, start Vpnc Widget as an App)
- Give "Superuser" rights on request (start Superuser app to verify and use newest Superuser App in case of troubles)
- Never use automatic Taskkillers (it will interrupt the vpnc service!)
- If nothing helps, activate the Debug Flag in the preferences screen and mail me after a trying to connect the session logfile:
/data/data/com.gmail.mjm4456.vpncwidget/cache/vpnc.log

* Restrictions/Issues:
- Supports Pre-Shared-Key (PSK) only (no SSL certificates)
- supports only one user/server profile
- profile credentials incl. passwords are stored at the phone (but hidden for apps without root access)
- if the "advanced routing" kernel feature is unavailable, the VPN connection may be lost when the WiFi hotspot renews DHCP info (you can re-connect by clicking Widget twice)

* Disclaimer:
- Use this product absolutely at your own risk
- VPNC Widget is distributed on an "AS IS" basis, WITHOUT WARRANTY OR LIABILITY OF ANY KIND, either expressed or implied

* Succesful tested ROMS:
- LeeDroid 2.2, 2.3, 2.4
- CyanogenMod 6.1.1
- Cognition 2.3v8
- neophyte7.8.1
- JME Rotohammer(Galaxy tab)
-*) OxygeN-2.0-RC7 (Android 2.3, based on CM7 beta)
-*) CyanogenMod 7.0.x
- and many more...

*) works but misses Advanced Routing feature in kernel image (see Restrictions/Issues)

Need more addresses in your network but don't feel like doing a bunch of math to find out which addresses you can use? We got you covered! Introducing subnet buddy! MidMoDev's sub netting calculator for android.

Control your KeyMatic door lock using an Android device.
Easy to configure and use.

Lock/Unlock/Open doors using your fingertip.

Supports alternate CCU-IP, e.g. for use with SSH-tunnels.

Needs a HomeMatic CCU with a LAN/WLAN-network connection.
Tested with CCU firmware 1.503.

DroidRTTY is an application to decode and encode Ham Radio RTTY with the build in microphone/speaker or wired to your radio.

A waterfall shows the frequency spectrum of 100Hz to 2500Hz. Just slide the waterfall slide on a RTTY carrier frequency and DroidRTTY will decode the signal.

In transmitting mode characters can be entered trough the keyboard. 9 Macros are also available to store standard texts like “name and qth” and “station info”

DroidRTTY also now includes a logbook. Callsign, Name RST etc can be easily tranfered into the lookbook from the receiving screen.
The logbook also includes ADIF export and import to transfer your logbook data to a PC based logging software.

Version 1.10 also includes 50 baud / 450Hz shift to receive the German Weather Service (Deutscher Wetterdienst)

Before you buy this software, please test with the free "VpnCilla (Trial)" (also available at the google play market)!

VpnCilla is a VPN Client for VPN Servers as FritzBox, Cisco PIX/ASA, Fortigate or other VPN Servers with IPSec Pre-shared Keying (Xauth IKE/PSK).

Features:
* Profile automatically taken from the Trial version (don't uninstall the Trial until the first run of this full version)
* No root access needed (if the device fully conforms to Android 4)
* Compatible with Fritzbox, Cisco PIX/ASA, Fortigate VPN Servers and others (?)
* Connects/Disconnects with a single click (by a Shortcut-Widget)
* Automatic Reconnect Mode on WiFi/Mobile failover/outage
* Supports Multiple Profiles
* Supports automatic Cisco Split Routing
* Passwords may be stored in profile or always manually entered when connecting (which is much more safe)

Advanced Settings:
* Possibility to specify WiFi Blacklists/Whitelists to explicitely deny/allow VPN on only specific WiFi ESSDs
* Possiblity to specify Manual Routes and/or DNS Server and much more...

Restrictions:
- Mention the security risk if passwords are stored in profile in case your device will be hacked or stolen!
- VpnCilla runs only if the TUN driver (tun.ko) as well as the the Android 4 VPN routing infrastructure is included in the firmware. UNFORTUNATELY NOT ALL DEVICE MANUFACTURER YET HAS INCLUDED IT!! Check with "VpnCilla (Trial)" first!
- Only IKE/PSK Xauth authentication is supported (no PPTP, no L2TP, no Hybrid RSA, no SSL, no Cisco AnyConnect, ...)
- supports IPv4 only (no IPv6)
- supports WLAN/WIFI as well as Mobile Data up to 3g. VpnCilla is unstable over 4g (LTE) on some devices / with mobile providers
- Active Screenfilter apps as Twilight or Lux might prevent selecting of the security dialog checkbox
- VpnCilla can't handle phase 1 rekeying initiated by the VPN server. On Fritzboxes this will occure after 1h connection time whereas on Cisco VPN servers the rekeying interval is configurable and by default after 8h. Typically the session stalls for 2-3 minutes until VpnCilla initiates a reconnect.

NCP Secure VPN Client Premium for Android

APPLICATION DESCRIPTION:
NCP Secure VPN Client Premium for Android is a universal IPsec VPN client which is compatible to all major IPsec VPN gateways (e.g. NCP, CISCO, Juniper/NetScreen ScreenOS, Microsoft Server 2008 R2, Check Point, SonicWall, LANCOM Systems, Teldat, Astaro, Adtran).
It provides reliable and encrypted network VPN connectivity from Android based devices, and ensures continuous corporate VPN access for users on the go, without the need to root the device. Whether providing VPN access to a virtual desktop session, business email, or most other Android applications, NCP Secure VPN Client enables business-critical application connectivity.

Please uninstall NCP’s Secure Client Preview (if available) prior to installing the new version. Before you uninstall the client preview, export your existing configuration and import it into the new client.

FEATURES:
- Widget for comfortable start of configured VPN connections
- IKEv1 (Main Mode, Aggressive Mode), IKEv2 support
- IP address assignment via local IP address/manually or IKE config. mode
- XAUTH on/off
- Split/full tunneling network access
- Pre-shared key
- PKCS#12 certificate support
- One-time-password support (OTP support)
- OTP token option; separate entry field for token code at user logon
- Auto reconnect mode: After starting the VPN connection the client will always try to reconnect after interruption of a WiFi or cellular connection, until the connection is manually disconnected by the user
- Configurable connection mode (always, auto-reconnect)
- Profile import of .pcf, .wgx, .ini or .spd files
- NCP VPN Path Finder Technology (prerequisite: NCP VPN gateway, starting with v 8.0, at the corporate headquarters)
- FIPS Inside: The NCP Secure VPN Client Premium for Android uses an embedded FIPS 140-2-validated cryptographic module (Certificate #1747) running on a Android platform per FIPS 140-2 Implementation Guidance section G.5 guidelines.

Furthermore, it is not recommended to have both client versions, NCP Secure VPN Client Premium for Android and NCP Secure VPN Client for Android (or the trial versions), installed in parallel.

FAQ:
For Frequently Asked Questions please visit our Developer Webpage Link.

COMPATIBLE DEVICES:
This release supports Android 4.0 (and later) devices with the VPN API. It is NOT necessary to root the Android device.

COMPANY PROFILE:
NCP Engineering GmbH is a manufacturer of software solutions for high-security company communication over public networks and the Internet. NCP’s core competencies lie in the areas of remote access, IP routing, VPN and firewall technologies, identity and access management (IAM), network access control (NAC) as well as strong authentication and integration of PKI infrastructures.
Simple operation, central management, compatibility and efficiency are essential qualities of the NCP solution. Integration into existing IT infrastructures that use a variety of client platforms can be undertaken without problems. Globally operational organizations rely extensively on NCP products, using them to interconnect all their information exchanges via the Internet.

FEEDBACK:
While we are unable to guarantee compatibility for all devices, we look forward to your feedback in connection with any problems you may encounter. You can provide us with feedback by sending us an email to:
android-vpn@ncp-e.com

By using this application, you agree with the end user license agreement:
http://www.ncp-e.com/fileadmin/pdf/alg_informationen/NCP_License_Terms_Android_Client.pdf